Milwaukee 1 Inch Threaded Steel Hawg Cutter, (49-57-1000)

Product Information

Milwaukee's Threaded Steel Hawg® cutters range from 3/4 inch to 6 inches and drill up to 2 inch hole depth in steel. These cutters drill up to 3 times faster than twist drill bits due to the carbide teeth and alternating cutting pattern. Steel Hawg(r) cutters can be used with most electromagnetic drill presses and can drill into: steel, stainless steel, cast iron or aluminum. Use arbor 49-57-0030 for use with Milwaukee's 4262-(1) mag press or arbor 49-57-0010 for use with Milwaukee's 4292-(1) mag press.

Product options:

• 1 1/16 inch, (49-57-1062)
• 1 1/2 inch, (49-57-1500)
• 1 1/4 inch, (49-57-1250)
• 1 1/8 inch, (49-57-1125)
• 1 11/16 inch, (49-57-1687)
• 1 13/16 inch, (49-57-1812)
• 1 15/16 inch, (49-57-1937)
• 1 3/16 inch, (49-57-1187)
• 1 3/4 inch, (49-57-1750)
• 1 3/8 inch, (49-57-1375)
• 1 5/16 inch, (49-57-1312)
• 1 5/8 inch, (49-57-1625)
• 1 7/16 inch, (49-57-1437)
• 1 7/8 inch, (49-57-1875)
• 1 9/16 inch, (49-57-1562)
• 13/16 inch, (49-57-0812)
• 15/16 inch, (49-57-0937)
• 2 inch, (49-57-2000)
• 2 1/16 inch, (49-57-2060)
• 2 1/2 inch, (49-57-2500)
• 2 1/4 inch, (49-57-2250)
• 2 1/8 inch, (49-57-2120)
• 2 3/4 inch, (49-57-2750)
• 2 3/8 inch, (49-57-2370)
• 2 5/16 inch, (49-57-2310)
• 2 5/8 inch, (49-57-2620)
• 2 7/8 inch, (49-57-2870)
• 2 9/16 inch, (49-57-2560)
• 3 inch, (49-57-3000)
• 3 1/2 inch, (49-57-3500)
• 3 1/4 inch, (49-57-3250)
• 3 1/8 inch, (49-57-3120)
• 3 3/4 inch, (49-57-3750)
• 3 3/8 inch, (49-57-3370)
• 3 5/8 inch, (49-57-3620)
• 3 7/8 inch, (49-57-3870)
• 3/4 inch, (49-57-0750)
• 4 inch, (49-57-4000)
• 4 1/2 inch, (49-57-4500)
• 4 1/4 inch, (49-57-4250)
• 4 1/8 inch, (49-57-4120)
• 4 3/4 inch, (49-57-4750)
• 4 3/8 inch, (49-57-4370)
• 4 5/8 inch, (49-57-4620)
• 5 inch, (49-57-5000)
• 5 1/2 inch, (49-57-5500)
• 6 inch, (49-57-6000)
• 7/8 inch, (49-57-0875)

• Tell a Friend