Milwaukee 1 Inch Quick Change Tang Drive Steel Hawg Cutter, (49-57-1002)

Product Information

Milwaukee's Quick Change Steel Hawg® cutters range from 1/2 inch to 2 inches and can drill up to 1 inch hole depth in steel. These cutters drill up to 3 times faster than twist drill bits due to the carbide teeth and alternating cutting pattern. Steel Hawg® cutters can be used with most electromagnetic drill presses and can drill into: steel, stainless steel, cast iron or aluminum. Use arbor 49-57-0012 or 49-57-0013 with Milwaukee's 4292-(1) or 4297-(1) mag presses or arbor 49-57-0032 with Milwaukee's 4262-(1) mag press.

Product options:

• 1 1/16 inch, (49-57-1064)
• 1 1/2 inch, (49-57-1502)
• 1 1/4 inch, (49-57-1252)
• 1 1/8 inch, (49-57-1127)
• 1 11/16 inch, (49-57-1689)
• 1 13/16 inch, (49-57-1814)
• 1 15/16 inch, (49-57-1939)
• 1 3/16 inch, (49-57-1189)
• 1 3/4 inch, (49-57-1752)
• 1 3/8 inch, (49-57-1377)
• 1 5/16 inch, (49-57-1314)
• 1 5/8 inch, (49-57-1627)
• 1 7/16 inch, (49-57-1439)
• 1 7/8 inch, (49-57-1877)
• 1 9/16 inch, (49-57-1564)
• 1/2 inch, (49-57-0251)
• 11/16 inch, (49-57-0689)
• 13/16 inch, (49-57-0814)
• 15/16 inch, (49-57-0939)
• 2 inch, (49-57-2002)
• 3/4 inch, (49-57-0752)
• 5/8 inch, (49-57-0626)
• 7/8 inch, (49-57-0877)
• 9/16 inch, (49-57-0564)

• Tell a Friend