Miller BackBiter Tie-Back Lanyards, (913B/6FTGN)

Product Information

Miller BackBiter offers the ultimate in tie-back safety. The webbing and snap hooks of regular lanyards are not designed to withstand the rigors of tying back. The innovative Miller BackBiter Tie-Back Lanyard with a Miller 5K Snap Hook was designed from top to bottom for tie-back use. Its features include: an all-in-one lanyard with SofStop Shock Absorber and cross-arm anchorage connector; heavy-duty polyester webbing and Cordura nylon webbing with five times more abrasion resistance; a first snap hook with a 5,000 pound (22kn) gate load capacity from any angle; and is available in green or blue webbing for greater chemical resistance.

Product options:

• Made of webbing; one leg; harness connection, locking snap hook; anchorage connection, locking 5K snap hook; standard length 6 feet (1.8 m); (913B/6FTGN)
• Made of webbing; two legs; harness connection, locking snap hook; anchorage connection, locking 5K snap hooks; standard length 6 feet (1.8 m); (8798B/6FTGN)

For greater chemical-resistant blue webbing, substitute “BL” for “GN” in the suffix of the corresponding lanyard model number (Ex: 913B/6FTBL).
Note: locking snap hook – 3/4 inch (19 mm) gate opening.
Cordura is a registered trademark of E. I. DuPont.

• Tell a Friend