Miller Turbo T-BAK Tie-Back Personal Fall Limiters, (MFLT-1/7.5FT)

Product Information

The Miller Turbo T-BAK tie-back personal fall limiter is the first and only retractable designed to tie-back anywhere along the lifeline. Its all-in-one, self-retracting lifeline/anchorage connector design reduces equipment required on the job site and it is designed for anchoring below a user's harness back D-ring for greater safety. The integrated shock absorber is especially designed for tie-back applications with load indicator device. Its features include: a 7.5 foot (2.3 m) working capacity; the Miller 5K locking snap hook, which is designed specifically for tie-back use; a 5,000 pound (22 kN) gate load capacity from any angle; and the user rating of up to 400 pound (181.4 kg) capacity. The Miller Turbo T-BAK tie-back personal fall limiter meets all applicable OSHA, ANSI, CSA and CE standards, including the ANSI Z359.1 requirement that states only 24 inches (.61 m) or less of lifeline extends out of the housing when the unit is fully retracted.

Product options:

• Turbo T-BAK without unit connector; 2.6 pounds (1.18 kg); (MFLT-1/7.5FT)
• Turbo T-BAK with a 17D-1 steel twist-lock carabiner; 3.2 pounds (1.45 kg); (MFLT-2/7.5FT)
• Turbo T-BAK with a 17D-2 lightweight, aluminum twist-lock carabiner; 2.8 pounds (1.27 kg); (MFLT-3/7.5FT)
• Turbo T-BAK with an ANSI Z359-compliant snap hook with 3/4 inch (19 mm) gate opening; 3.3 pounds (1.50 kg); (MFLT-5/7.5FT)

• Tell a Friend